Weather conditions can affect the application of Arturo products . If you follow these guidelines, you can avoid problems.
Storage and transport
We draw your attention to the fact that during too cold ( < 2 ° C / 36°F) storage and transport you must protect all products. There are products that require other circumstances. For example the B-component PU–Self Levelling Floors must be protected from cold (< 10°C/ < 50°F). For the exact temperature and humidity , please check to the product data sheets .
Processing and curing of products
When using Arturo products in autumn and winter the following applies:
Lower temperatures extend the curing time or stop in the worst case hardening. Due to a high humidity is more easily dewing on the floor, this has a negative influence on the adhesion between the layer and the product properties.
Seal Layers 1C PU
Extra attention for 1C PU Sealers/ Coatings : This 1C PU Sealers/ Coatings are moisture curing . This means that the relative humidity and temperature play an important role in the curing and degree of gloss / matt quality of the seal layer. With varying humidity , temperatures , thicknesses and air flows from eg heaters variations in gloss can occur.